Home | Feedback | Contact


I.S.O. 9001-2000 Certified Company
   
Products Home >> Product >> PLB HDPE Duct
  Products :-
S.W.R. Pipes
Elastomeric Pipes
Rigid PVC Pipes
Casing Pipes For Tube Well
Conduits Pipes
Plumbing Pipes
Suction Hose & Garden Pipes
Submersible Column Pipes
Solvent Cement
PLB HDPE Duct
HDPE Pipes
HDPE ID Pipes
HDPE Sprinker Pipes
  Fitting :-
Agriculture Fittings
SWR Fittings
Sprinkler Fittings
   
   
   
   
   
   
   
   
   
   
   
   
   
                                           PLB HDPE Duct 

With information technology industry coming of age in India, the need has arisen for safe housing of  fibre optic cable and metal cable, used as basic backbone in communication. TEXMO as a large processor of plastic materials in India has introduced PVC, HDPE, Plain, Permanently Lubricated, Ribbed, Tracer & Large diameter ducts for safe placement of cables and future up gradation and replacement of damaged cables.
 
TEXMO believes in enhancing customer value and "TEXMO" brand not only facilitates cable placement but creates a permanent conduit with permanent lubrication for future use.
Applications :
Industrial :          
    TEXMO co-extruded permanently lubricated HDPE ducts are used for laying Optical fibre cable (OFC) as underground conduits.
Salient Features of PLB HDPE Duct Pipes :
 

Reduces internal co-efficient of friction with Optical Fibre Cable

         
 

Same physical and chemical properties as HDPE, a base and main material.

 

Is a polymeric material which is integral and strongly locked into HDPE.

 

Has no toxic or dermatic hazards for safe handling.

 

Gets evenly Co0extruded and distributed as a solid Permanent Lubricant around the bore and along the length of the Duct.

 

Has stable Chemical properties.

Characteristics :

1.

Co-efficient of friction -

max 0.344

 

External Surface of sub-duct with PVC main duct

max 0.056

 

Internal Surface of sub-duct against rope

max 0.08

 

Internal Surface of sub-duct against cable

 

2.

Temperature resistance range -

 

 

Recommended temperature range of installing Permanently Lubricated Duct is from

- 5° C to + 50° C

3.

Bending Radius -

Minimum ten times of Outside Diameter

4.

Anticipated Life Time

50 years

Product Range :  

Main duct meant for direct burial

Size :

Outer Diameter

Wall Thickness

50 / 42 mm

50 mm

4.0 mm ± 0.3 mm

40 / 33 mm

40 mm

3.5 mm ± 0.2 mm

32 / 26 mm

32 mm

3.0 mm ± 0.2 mm

Sub Duct :

40 / 35 mm

40 mm

2.5 mm ± 0.2 mm

40 / 34 mm

40 mm

3.0 mm ± 0.2 mm

32 / 38 mm

32 mm

2.0 mm ± 0.2 mm

32 / 27 mm

32 mm

2.5 mm ± 0.2 mm

 

Material :

The main raw material being used for the manufacture of permanently Lubricated Ducts is High Density Polyethylene (HDPE). This raw material is conforming to IS: 7328-1992 or to any other equivalent standard. Testing this material as per IS 2530 or ISO 1183 & ISO 1133 the following requirements are met strictly:-

  • Density : 0.940 to 0.958 gm/cc at 27° C
  • Melt flow Index : 0.2 to 1.1 gm/10 min at 190° C and 5 Kg Load
   
Home | Company | Directors | Products | Download | Exports | Careers | Contact Us

2008©Copyright Texmo Pipes And Products Limited All rights reserved.